Correct planning, installation and care help ceramic tile and sintered stone perform beautifully over time. This summary is based on the supplied catalogues and does not replace product-specific technical instructions.
Planning quantities and patterns
Calculate from the finished area and allow for cuts, pattern direction and future repairs. The PRIVAREA catalogue suggests a typical five percent allowance and around ten percent for diagonal layouts, plus any project-specific contingency. Sort by colour number and size, dry-plan directional, continuous, random or book-matched patterns, and agree joints before fixing.
Substrate, support and laying
Confirm a flat, stable substrate and a compatible adhesive system with a qualified installer. The catalogue calls for professional tile adhesive and indicates that larger wall formats may require additional support or mechanical fixing appropriate to the application. Use spacers for consistent joints, keep surfaces clean as work proceeds and inspect adhesion after curing.
Cutting, drilling and grouting
Use equipment suitable for the selected ceramic or sintered surface. Manual straight cutters suit appropriate straight cuts; demanding cuts and holes may require water-cooled diamond tools. Keep material fully supported, cool the tool, work gently and follow the fabricator’s direction for drilling. Clean joints before grouting, choose a compatible grout or sealant and remove residue promptly.
Cleaning and maintenance
Identify the stain and finish before choosing a cleaner, test first in an inconspicuous area and follow the product label and safety data sheet. Never mix cleaning chemicals. Remove cement residue, oil, paint, tea, coffee, ink, mildew, scale and rust only with a cleaner confirmed compatible with the exact surface; rinse and dry as directed.